Power assisted manipulator
Power manipulator and balance hanging have the same function to make the weight "lose weight", in the workpiece center of gravity away from the arm hanging point, or the workpiece needs to be turned over or tilted, at this time the appropriate choice of standard power manipulator, and in the factory height limit, you can choose this standard power manipulator.
Power manipulator can achieve the promotion of large 500Kg workpiece, the radius can reach 3 meters, the height of 1.800 meters. According to the different weight of the lifting workpiece, should choose the right machine (that is, the weight of the small type of machine), if we use a large load of 500Kg manipulator to carry 50Kg workpiece, then the operation performance is certainly not very good, feel a little heavy.
Basic Specifications:
1: Working pressure: not less than 5KG
2: pressure medium: clean air after filtering
3: Large working radius: 3 meters
4: Work with large load: 500KG
5:990 degrees of rotational freedom
6: Installation mode: ground moving or fixed or upper hanging moving or upper fixed.
7. Height of main arm: it can be adjusted flexibly according to the site conditions (generally about 3.5m)
8: Control mode: can simply rely on gas control, can also do electrical combined control (or do remote control)
9: Brake device: each joint is equipped with a lock brake device to ensure the freedom of the equipment.
The above parameters are for reference only. The specific parameters can be based on customer requirements
