Reasons for using casting manipulator
Castings are usually manufactured manually by using a casting barrel to hold the metal casting liquid in the casting cavity for casting, so that the castings can be formed. In this way, the casting liquid will spill out of the barrel due to the instability of the extraction during the casting process, which not only causes material waste and increases the cost, but also easily causes production safety accidents once the spilled casting liquid falls on the human body because of the high temperature of the casting liquid, Burn workers will bring very serious consequences. Moreover, manual handling of casting liquid is slow, which will seriously affect labor productivity.
The casting manipulator includes a column, which is connected with a cross arm. The cross arm is provided with a lifting arm. Both ends of the lifting arm are convex with lifting rods. The outer end of the lifting rod is provided with a hook. A cross rod is arranged between the lifting arm and the cross arm.
The horizontal arm and pull arm are used to realize the movement of the casting barrel, and the rotation of the horizontal bar in the vertical direction is used to realize the turnover of the hook, so that the casting barrel can be turned over and cast at the position where the casting is needed, realizing the automatic process of extracting the casting liquid, realizing automation, eliminating the operation process of workers, improving the working efficiency, improving the production efficiency, and reducing the production cost, It also prevents the pouring liquid from splashing on the workers, and prevents the workers from being injured by mistake, and protects the personal safety of workers. It has high safety performance and good use effect, which is conducive to promotion.
Therefore, the emergence of casting manipulator can promote the casting process to be more stable, safer and more efficient.
