The cantilever crane shall be maintained regularly
Cantilever crane is a light working strength crane,which is composed of column,slewing drive device of slewing arm and electric hoist.It has light deadweight,large span,large lifting capacity,and is economical and durable.
Cantilever crane is a new generation of light lifting equipment made to adapt to modern production.It is especially suitable for short distance,frequent use and intensive lifting operations with high reliability chain electric hoist.It has the characteristics of high efficiency,energy saving,trouble saving,small floor area,easy operation and maintenance.
Mobile cantilever crane is more flexible,flexible and adaptable.It is a necessary independent emergency hoisting equipment for efficient automatic production line.With it,the production line can be kept unblocked.
The cantilever crane has a reasonable structure,simple use method,sensitive rotation,and a wide range of use.It is a material lifting machine with extraordinary efficiency and energy conservation.
After running for a long time,there will be more or less wear on the machine,which needs to be cleaned and maintained on time.Clean the stains on the outer layer of the machine,and check the parts to see if they need to be replaced.If they need to be replaced,they should be replaced immediately to prevent the effect of use.In terms of lubrication,we should also pay attention to that the service life of the machine can be prolonged by changing the lubricating oil on time and maintaining it regularly.
The operation of the machine must also be carried out in accordance with the operating specifications and requirements,and the relevant safety standards must be observed.During the operation of the cantilever crane,it is not allowed to operate casually or conduct illegal operations.Its load requirements are different from the application requirements under different conditions.
Characteristics of cantilever crane operation mode:
1.Manually rotate 180 degrees(wall crane);360°(column type cantilever crane)
2.Manual or electric drive.
3.Imported or domestic hoist is optional.
4.Wireless remote control
Environmental conditions for use of cantilever crane:
1.The power supply of the crane is three-phase AC,and the rated voltage is 380V.
2.The altitude of the crane installation site shall not exceed 2000M.
3.The working environment of the crane shall be free of flammable,explosive and corrosive gases.
4.The crane is not allowed to lift molten metal,toxic substances,inflammables and explosives.
